Application Guides
Read guides, tips and tricks on how to apply Sentinel Auto care products.
COATING APPLICATION Prepare all surfaces using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the cleaning. Drip 10 drops of Sentinel TRIM onto the applicator pad and apply coating ONLY IN ONE DIRECTION. Allow to air dry. Repeat application process on adjacent area, then the next until all the trims
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel PREMIUM onto the applicator pad and apply coating to approximately 300mm square. Apply in all directions to ensure full coverage. When “wetness” on the coating has passed,
COATING APPLICATION Clean all glass & windscreen surfaces with shampoo. Remove gently any stubborn contaminants with the supplied Soft Foam Sanding Sponge with plenty of soapy water. Always must keep your surface lubricated when using the Soft Foam Sanding Sponge and take care not to touch adjacent paintwork or trims with the abrasive pad. Rinse
COATING APPLICATION Squeeze a coin-sized amount of Sentinel HIDE Cleaner onto a damp Nano Cleaning Sponge (Magic Sponge) and clean gently in both circular and linear motion rinsing the applicator often. Apply more of the Sentinel HIDE Cleaner if needed for a larger area or stubborn stains. Wipe off excess Sentinel HIDE Cleaner with a
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel EXTREME onto the applicator pad and apply the coating to approximately 300mm square. Apply in all directions to ensure full coverage. Buff the area immediately with a
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel COATING(s) onto the applicator pad and apply the coating to approximately 300mm square. Apply in all directions to ensure full coverage. When “wetness” on the coating has