Sentinel 3D Expert Kit

Description

SENTINEL 3D coating has been specifically developed for premium slickness and wet-look applications. It can be applied as a single layer or multi-layered depending on your requirements and to extend protection duration. SENTINEL 3D coating has been applied and tested to provide a slick “still wet” effect on all prepared paint finishes. With proper care and follow our Sentinel Maintenance guide, SENTINEL 3D coating can provides protection up to two(2) years and/or more.

APPLICATION

• Clean all surfaces with the included Sentinel CLEANSE (Panel Wipe) to remove oils and residue from claying or polishing.
• Apply SENTINEL 3D generously to the applicator cloth using the applicator block, covering a 60cm x 60cm square area evenly in all directions for complete coverage. When the coating begins to “sweat” and displays a “rainbow” effect, buff it with a clean microfiber towel.
• In warmer temperatures, drying times are shorter, so be sure to buff the coating sooner to prevent cloudiness.
• Repeat this process for each section until the entire car is coated.
• Do not apply to the glass.
• Let the coating cure for at least 2 – 4 hours, with full curing taking seven days. We advise against washing the car during this seven-day period.
• To prevent watermarks during the curing period (seven days), apply a thin layer of Sentinel MIST (QD) to provide a sacrificial barrier for added protection.
• An optional second layer of SENTINEL 3D can be applied after one hour, if sufficient product remains, covering up to 80cm x 80cm square area.

AFTERCARE & MAINTENANCE

• After washing with Sentinel RELEASE (pH Neutral Shampoo), rinse the car thoroughly.
• Whilst the surface is still wet, apply SENTINEL MIST (QD) by misting onto the paintwork treating one panel at a time.
• Buff and dry with high quality clean microfiber towels to finish.
• For enhanced gloss and extended durability, apply SENTINEL MIST+ (QD) to the clean, dry paintwork by misting onto a clean microfiber cloth. Spread evenly over each panel and buff to a high gloss finish.

Adhering to the Aftercare procedures can extend the protection to last up to 2 years or more.

TIPS

• Do Not Apply To The Glass. This product is formulated for a different use and is not interchangeable with the glass-specific version.
• If using the last of the coating product, concentrate on the horizontal panels, hood, roof etc.
• Take note of the time to begin to coat as this is the drying time reference point.
• Use a fresh microfiber buffing towel every few panels.

PRECAUTIONS

• Use personal protection equipment (gloves, safety glasses, mask).
• Keep out of reach of children.
• Do not ingest. Seek medical advice.
• Avoid prolonged contact with skin.
• Store out of sunlight and in a cool dry area.
• Do not use in conjunction with other products.

CHARACTERISTICS

• Durable wet-look coating
• Easy to apply (For professional /DIY)
• Durability: 24 months and/or more (with proper maintenance)
• Permanent Bonding
• Barrier protection against acid rains, bird droppings, oxidation & corrosion
• UV & weather resistance
• Super-hydrophobic effect
• Self-cleaning effect
• Deep, rich and highly glossy wet-look finish
• Increases reflective gloss
• Can be multi-layered
• Easy cleaning and maintenance