SENTINEL TRIM COATING

COATING APPLICATION

• Prepare all surfaces using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the cleaning. 
• Drip 10 drops of Sentinel TRIM onto the applicator pad and apply coating ONLY IN ONE DIRECTION. Allow to air dry.
• Repeat application process on adjacent area, then the next until all the trims / bumpers are finished.
• Do not apply to the glass*.
• The coating should be left at least 2-4 hours without contact with water and will be completely cured in seven days. 
• After 7 days, you may apply the second layer of Sentinel TRIM. This is optional and dependant of amount remaining product.
• When applying second layer of coating, a larger area may be applied.

AFTERCARE & MAINTENANCE

• After washing with pH Neutral detergent car shampoo (Sentinel RELEASE), rinse the surface thoroughly. 
• Dry the surface thoroughly, then apply the SENTINEL Quick Detail using the misting spray to the surface. 
• Buff with high quality clean microfiber towels to finish.
• For extended durability, the SENTINEL MIST+ (QD) can be applied to the clean and dry surfaces by misting onto a clean microfiber cloth, gently spread over each panel in turn, then buffed to a nice finishes.

• After washing with pH Neutral detergent car shampoo (Sentinel RELEASE), rinse the surface thoroughly. 
• Clean the surface thoroughly with a clean microfiber towel. 
• A layer of Sentinel MIST (Quick Detail) can be applied as desired. 
• Buff with high-quality clean microfiber towels to finish.
• For extended durability, the SENTINEL MIST+ (QD) can be applied to the clean and dry surfaces by misting onto a clean microfiber cloth, gently spread over each panel in turn, then buffed to a nice finish.

Following the Aftercare procedures will further extend the duration of the protection to last one(1) to two(2) years or longer.

TIPS

• Do Not Apply To The Glass. This product differs from the coatings we have for glass and are not exchangeable.
• Take note of the time you both begin to coat and complete the coating as these become the drying time reference points.
• Use a new buffing Microfiber towel for buffing the surfaces and discard after use.
• Following the Aftercare procedures could extend the duration of the protection past one(1) year to two(2) years or longer.

PRECAUTIONS

• Use personal protection equipment (gloves, safety glasses, mask)
• Keep out of reach of children
• Do not ingest. Seek medical advice 
• Avoid prolonged contact with skin 
• Store out of sunlight and in a cool dry area
• Do not use in conjunction with other products
• Drying times will be reduced in warmer temperatures
• Discard application and buffing towels after used. Cured coating on the towels may cause damage