Sentinel Autocare
Modern paint finishes employ an extra layer of clear coat that forms an invisible barrier innocently protecting the paint during its lifespan. This clearcoat layer takes the brunt of the damage that a car’s surface endures each time it is used. Thankfully this provides detailers with a layer to work with that can be polished
A vital part of any detailing decontamination is the Clay-bar or Clay-cloth stage. Without doubt this should not be overlooked or missed as introduced damage may result during the polishing phase. This simple action uses a product to grab any contaminant still present on the surface after washing has been completed. These stubborn particles cling
Since the first SiO2 coatings or more commonly termed ceramic coatings, initially it was only used for professional uses due to the complex chemical interaction and difficult application processes. These limitations meant that only marine applications were common and the automotive side was rare at best. Several years later the chemical blends have improved and
For years car lovers have happily spent time applying a layer of auto-wax to protect the paint finish and enhance the overall appearance of their prized possession. In addition, the whole waxing experience can be used as a special time, an alone time that is also incredibly satisfying. Most car owners find waxing both relaxing
COATING APPLICATION Prepare all surfaces using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the cleaning. Drip 10 drops of Sentinel TRIM onto the applicator pad and apply coating ONLY IN ONE DIRECTION. Allow to air dry. Repeat application process on adjacent area, then the next until all the trims
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel PREMIUM onto the applicator pad and apply coating to approximately 300mm square. Apply in all directions to ensure full coverage. When “wetness” on the coating has passed,
COATING APPLICATION Clean all glass & windscreen surfaces with shampoo. Remove gently any stubborn contaminants with the supplied Soft Foam Sanding Sponge with plenty of soapy water. Always must keep your surface lubricated when using the Soft Foam Sanding Sponge and take care not to touch adjacent paintwork or trims with the abrasive pad. Rinse
COATING APPLICATION Squeeze a coin-sized amount of Sentinel HIDE Cleaner onto a damp Nano Cleaning Sponge (Magic Sponge) and clean gently in both circular and linear motion rinsing the applicator often. Apply more of the Sentinel HIDE Cleaner if needed for a larger area or stubborn stains. Wipe off excess Sentinel HIDE Cleaner with a
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel EXTREME onto the applicator pad and apply the coating to approximately 300mm square. Apply in all directions to ensure full coverage. Buff the area immediately with a
COATING APPLICATION Wipe all areas using the supplied Sentinel CLEANSE (Panel Wipe) to remove any oils or residue from the claying or polishing. Drip 10 drops of Sentinel COATING(s) onto the applicator pad and apply the coating to approximately 300mm square. Apply in all directions to ensure full coverage. When “wetness” on the coating has